ASP Theta 13 Instructions Manual

Theta 13
Flying Model Rocket Kit
Features Laser-!
cut Balsa Fins, !
Balsa Nose Cone &
Streamer Recovery.!
Uses 13mm "Mini"
Engines.
Specifications:
! Length:14"/35.6cm
! Diameter: 0.74"/18.8 mm
! Weight: 0.6 oz/17 gm
! Streamer Recovery
! Recommended Engines:
! ! 1/4A3-3T; 1/2A3-2T;
! ! 1/2A3-4T; A3-4T; A10-3T
! Skill Level: Beginner
Kit EKTH - 13
This is a model rocket kit requiring
construction. Tools, adhesives,
finishing materials, launch equipment
and engines are not supplied.
P.O. Box 1408, Gibsonton, FL 33534
www.asp-rocketry.com
Estimated (calculated) altitudes:
with
1/4A3-3T: 105 feet/32 meters
with 1/2A3-2T: 230 feet/70 meters
with 1/2A3-4T: 255 feet/78 meters
with A3-4T: 535 feet/163 meters
with A10-3T: 495 feet/151 meters
Aerospace Speciality Products has taken reasonable
care in the design and manufacture it's products.
Aerospace Speciality Products cannot control the use
and storage of same once sold and cannot assume any
responsibility for personal or property injury resulting
from the use, storage and/or handling of its products.
The buyer assumes all risks and liabilities therefrom
and accepts the uses Aerospace Speciality Products
products on these conditions. No warranty either
expressed or implied is made regarding Aerospace
Speciality Products products, except for replacement or
repair, at Aerospace Speciality Products option, of
those products proven to be defective in manufacture
within one month from date of original purchase. For
repair or replacement under this warranty, please
contact Aerospace Speciality Products. Proof of
Purchase will be required. Note: Your state may provide
additional rights not covered by this warranty.
© 2015 Aerospace Speciality Products