ASP Neo Mini Manual

Neo Mini
An easy-to-build and great flying model rocket
kit! Ideal kit for beginners and a fun sport model
for the more experienced modeler! Uses
economical 13mm "Mini" Engines.
Specifications:
Length: 11.875"/30.2 cm
Diameter: 0.739"/18.8 mm
Weight: 0.4 oz/11.3 gm
9" Parachute Recovery
Recommended Engines: 1/4A3-3T;
1/2A3-2T;
Skill Level: Beginner
Center of Pressure: 9.5" from tip of nose
This is a model rocket kit requiring construction.
Tools, adhesives, finishing materials, launch
equipment and engines are not supplied.
P.O. Box 1408, Gibsonton, FL 33534
www.asp-rocketry.com
1/2A3-4T; A3-4T; A10-3T
Estimated (calculated) altitudes:
with
1/4A3-3T: 135 feet/41 meters
with 1/2A3-2T: 265 feet/81 meters
with 1/2A3-4T: 295 feet/90 meters
with A3-4T: 575 feet/175 meters
with A10-3T: 520 feet/158.5 meters
Aerospace Speciality Products has taken reasonable
care in the design and manufacture it's products.
Aerospace Speciality Products cannot control the use
and storage of same once sold and cannot assume any
responsibility for personal or property injury resulting
from the use, storage and/or handling of its products.
The buyer assumes all risks and liabilities therefrom
and accepts the uses Aerospace Speciality Products
products on these conditions. No warranty either
expressed or implied is made regarding Aerospace
Speciality Products products, except for replacement or
repair, at Aerospace Speciality Products option, of
those products proven to be defective in manufacture
within one month from date of original purchase. For
repair or replacement under this warranty, please
contact Aerospace Speciality Products. Proof of
Purchase will be required. Note: Your state may provide
additional rights not covered by this warranty.
© 2014 Aerospace Speciality Products