Roberto Sport SUMMER COVER Quick Start Manual

Advertisement

Quick Links

Roberto Sport srl
Via A. Casale 63/A (Zona Industriale), 10010 Lessolo, TO
ITALY
P.I. 05961970018
Tel. +39 0125 58848 - Fax +39 0125 58851
info@robertosport.it /www.robertosport.it
Thank you for choosing one of Roberto Sport's products. Our tables are famous for their quality and accuracy of their
components. Roberto Sport has been producing table soccer, pool and hockey tables for more than 65 years. Huge
experience and tradition, constant research and innovation have brought Roberto Sport's name as a synonymous of
Unpacking and assembly operation should be carried out entirely by adults. Keep children away throughout all steps.
All small parts such as bolts, screws etc., not yet assembled, and nylon bags might be swallowed or inhaled.
The model you bought is for outdoor use, therefore, you can place it in an open environment since its material resists
to different weather conditions. Although the rods have an additional chrome plating, they are made of hardened
steel which, in case of getting wet, may form rust. To prevent the rust formation, please find included a special
waterproof cover to be put when not in use.
In order to keep your tables performance at a high level, we suggest you clean it periodically by using a humid dust
cloth. For difficult stain you may use abrasive-free detergents. For an utmost sliding rods: we suggest you get the
external part of the rod lubricated (the one in touch with the bushing) along with the rod's internal part by using a
silicon spray. Roberto Sport uses and supplies a special silicon spray studied, produced and tested for these purposes.
Do not use grease; it holds the dust and might block the rod sliding. The telescopic rods assembled on this table are of
a highly safe. To prevent rods bending, we recommend you do not load weight on the rods when extended.
For any problem you might have, or any info you might need, do not hesitate to visit our web site:
www.robertosport.it or contact us at:
Roberto Sport has a two- year warranty for its products starting from the acquisition date. Warranty covers
manufacture defects only; it doesn't cover damages caused by misuse or assigned to be due to wear & tear. A
manufacture defect must be reported at the earliest by a written communication within two months. A written
notification must be sent to the vendor. Roberto Sport is committed to restore the table with no charge on the buyer
by repairing or replacing the damaged part/parts or by offering a discount.
/
SUMMER COVER
the "Made In Italy" football tables all over the world.

GENERAL WARNINGS

CARE & MAINTENANCE
sales@robertosport.it

WARRANTY

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SUMMER COVER and is the answer not in the manual?

Questions and answers

Summary of Contents for Roberto Sport SUMMER COVER

  • Page 1 A written notification must be sent to the vendor. Roberto Sport is committed to restore the table with no charge on the buyer by repairing or replacing the damaged part/parts or by offering a discount.
  • Page 2 PARTS LIST Lubricant spray Balls Scoring unit Waterproof cover Material for legs assembly Iron crossbar Iron legs Locknut diam. 10mm Metal flat 10x30 Screw 8x120 (for crossbar) Plastic flat Foot diam. 80 Metal flat 12x32 L allen spanner 6 Material for rods Screw 5x20 Set complete of rods Material for aluminium border top...
  • Page 3 ASSEMBLY INSTRUCTIONS The football table is packed in a carton box with the rods and legs to be assembled. The assembly operation is very simple and needs about 45 minutes. To start please follow the below instructions. Please read and keep these instructions for future reference. This table is sent out with the glass cover.
  • Page 4 Rods assembly Insert the rods in the holes starting from the handles side Set the bushing with the screw holes upwards Fix the bushing with the 5x20mm screws Fixing the aluminium border top Fix the coin conter with the correspondant screws Fix the aluminium edge with the screws 4.5x16mm (3 each side) Metal part for ball exit and top cover assembly...

Table of Contents