Roberto Sport ROBY PROFESSIONAL Quick Start Manual

Advertisement

Roberto Sport srl
Via A. Casale 63/A (Zona Industriale), 10010 Lessolo, TO
ITALY
P.I. 05961970018
Tel. +39 0125 58848 - Fax +39 0125 58851
info@robertosport.it /www.robertosport.it
Thank you for choosing one of Roberto Sport's products. Our tables are famous for their quality and accuracy of their
components. Roberto Sport has been producing table soccer, pool and hockey tables for more than 65 years. Huge
experience and tradition, constant research and innovation have brought Roberto Sport's name as a synonymous of
Unpacking and assembly operation should be carried out entirely by adults. Keep children away throughout all steps.
All small parts such as bolts, screws etc., not yet assembled, and nylon bags might be swallowed or inhaled.
The model you just bought is for INDOOR USE. For this reason we suggest you to install it in sheltered environment,
with low humidity degree and direct sun bean free.
In order to keep your tables performance at a high level, we suggest you clean it periodically by using a humid dust
cloth. For difficult stain you may use abrasive-free detergents. For an utmost sliding rods: we suggest you get the
external part of the rod lubricated (the one in touch with the bushing) along with the rod's internal part by using a
silicon spray. Roberto Sport uses and supplies a special silicon spray studied, produced and tested for these
purposes. Do not use grease; it holds the dust and might block the rod sliding. The telescopic rods assembled on this
table are of a highly safe. To prevent rods bending, we recommend you do not load weight on the rods when
extended.
For any problem you might have, or any info you might need, do not hesitate to visit our web site:
www.robertosport.it or contact us at:
Roberto Sport has a two- year warranty for its products starting from the acquisition date. Warranty covers
manufacture defects only; it doesn't cover damages caused by misuse or assigned to be due to wear & tear. A
manufacture defect must be reported at the earliest by a written communication within two months. A written
notification must be sent to the vendor. Roberto Sport is committed to restore the table with no charge on the buyer
by repairing or replacing the damaged part/parts or by offering a discount.
/
ROBY PROFESSIONAL
the "Made In Italy" football tables all over the world.

GENERAL WARNINGS

CARE & MAINTENANCE
sales@robertosport.it

WARRANTY

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ROBY PROFESSIONAL and is the answer not in the manual?

Questions and answers

Summary of Contents for Roberto Sport ROBY PROFESSIONAL

  • Page 1 A written notification must be sent to the vendor. Roberto Sport is committed to restore the table with no charge on the buyer by repairing or replacing the damaged part/parts or by offering a discount.
  • Page 2 PARTS LIST Lubricant spray White ball Scoring unti Material for legs assembly Iron plate Pin diam. 8 Screw 4x20 tc Allen spanner 4mm Screw 6x60 MA Screw 6,3x60 TC Sheet metal screw 6,3x50 Felt cover Per montaggio aste screw 5x20 Set of 4 roods...
  • Page 3 ASSEMBLY INSTRUCTIONS The football table is packed in a carton box with the rods and legs to be assembled. The assembly operation is very simple and needs about 30 minutes. To start please follow the below instructions. Please read and keep these instructions for future reference.
  • Page 4 Leg assembly Rods assembly Only for cover model...

Table of Contents