Pentair ONGA Owner's Manual

Spa blower

Download this manual

ONGA

Spa Blower

Installation & operation

instructions

Should the installer or owner be unfamiliar with the correct

installation or operation of this type of equipment you should

contact the distributor/manufacturer for the correct advice before

proceeding with the installation or operation of this product.

Need help?

Do you have a question about the ONGA and is the answer not in the manual?

Page 1 ® ONGA Spa Blower Installation & operation instructions Should the installer or owner be unfamiliar with the correct installation or operation of this type of equipment you should contact the distributor/manufacturer for the correct advice before proceeding with the installation or operation of this product.
Page 2 These instructions act as a guide only and do not cover every contingency. People not familiar with pool filtration and pumping equipment should seek advice from an authorised Onga stockist. ® ONGA SPA BLOWER INSTALLATION AND OPERATION INSTRUCTIONS 1. Run 50mm PVC pipe line from the spa pool manifold outlet to spa blower position 2.
Page 3 (2) 800mm (footwell manifold) If the spa depth/manifold dimensions vary from above please contact the Pentair Water office in your state for advice and verification, failure to comply may damage the equipment and void the product warranty. OPERATION OF YOUR SPA BLOWER 1.
Page 4: Troubleshooting Guide
OK and spa blower still doesn't start, remove spa blower and take it to the nearest Pentair Water service agent. Spa blower is making a grinding noise when operating.
Page 5 Notes: Page 5...
Page 6 Notes: Page 6...
Page 7 Notes: Page 7...
Page 8 Phone: +61 3 9709 5800 Fax: +61 3 9709 5888 © Information contained here-in remains the property of Pentair Water Pty Ltd. Any reproduction, display, publication, modif ication or distribution is strictly prohibited without the prior written permission of Pentair Water Pty Ltd.