Advertisement
FRAME INSTALLATION
1. Place the oven adjacent to the wall or cabinet open-
ing. Plug the power cord into the electrical outlet.
2. Carefully guide the assembled oven into the pre-
pared opening. Slide the oven on the Exhaust Duct
Assembly. See Illustration 4. Avoid pinching the cord
between the oven and the wall. Adjust the position of
the oven so that the feet of the oven are fitted into the
recesses of the Exhaust Duct Assembly. See
Illustration 5.
3. Position the FRAME ASSEMBLY to be square with
the oven. Carefully place the FRAME ASSEMBLY
on the oven. Check that it is level and then secure
with two SCREWS B. See Illustration 6.
4. Secure the bottom portion of the FRAME ASSEM-
BLY with the two remaining SCREWS B. See
Illustration 6.
Illustration 4
Installation Instructions
Exhaust Duct Assembly
Screw B
Screw B
4
Recess
Illustration 5
Screw B
Screw B
Illustration 6
Foot
Advertisement
