Download Print this page

Hamilton Beach Commercial Tempest Series Operation Manual

Hide thumbs Also See for Tempest Series:

Advertisement

Quick Links

Tempest
Series Blenders
Operation Manual
Mélangeurs de series
Tempest
Manuel d'utilisation
Licuadoras de series
Tempest
Manual de uso
840065601
Technical Service: 1-866-285-1087 (www.commercial.hamiltonbeach.com)

Advertisement

loading

Summary of Contents for Hamilton Beach Commercial Tempest Series

  • Page 1 Tempest Series Blenders Operation Manual Mélangeurs de series Tempest Manuel d’utilisation Licuadoras de series Tempest Manual de uso 840065601 Technical Service: 1-866-285-1087 (www.commercial.hamiltonbeach.com)
  • Page 2: Blender Safety

    You can also order replacement parts by calling your nearest Hamilton Beach Commercial Service Center or Please also record the purchase date of your your local dealer.
  • Page 3: Important Safety Instructions

    Blender Safety IMPORTANT SAFETY INSTRUCTIONS WARNING – When using electrical appliances, basic safety precautions should be followed, including the following: • To prevent damage to blender, jar, or cutter • Read all instructions. assembly, DO NOT move or shake blender •...
  • Page 4: Caring For The Blender

    Caring for the Blender Cleaning the Blender wWARNING wWARNING Cut Hazard Electrical Shock Hazard Always place cover on jar when blending. Plug into a grounded outlet. Do not put hands, spoons, or other utensils Do not remove ground. in jar when blending. Do not use an adapter.
  • Page 5: Troubleshooting Guide

    Caring for the Blender Troubleshooting Guide Problem . . . Solution . . . A system fault has been detected. Unplug unit for 5 seconds, and then plug unit Operation/Status light back in. If light is still red, unplug unit for 6 minutes, and then plug unit back in. lights red If light is still red, refer to "Requesting Assistance or Service.”...
  • Page 6: Product Warranty

    Product Warranty This Warranty supercedes all other Product Warranties This product is warranted to be free from defects in material and workmanship for a period of three (3) years parts/ two (2) years labor OR 15,000 cycles (whichever comes first) from the date of original pur- chase, except as noted below.