Advertisement
Always use the recommended SD Card for your camera. Tactacam 5.0 requires UHS
Speed Class 3 (U3) to deliver the necessary write speed for cameras like the 5.0 that
can shoot 4K and high-bitrate video. U3-certified SD cards must be able to maintain a
minimum write speed of 30MB/s to ensure that recording continues smoothly without
any dropped frames. You can use up to a 128GB card with the 5.0 Tactacam only.
Tactacam Fish-i, 4.0 and Solo
WiFi cameras requires a class
10 or U1, 32, 64 or 128 GB micro
SD Card.
Note: You should always format
your SD Card before using it in
your Tactacam for the first time or
after it has been used in any other
device. Only use high quality
micro SD Cards. Tactacam SD
Cards, Lexar, or SanDisk Ultra
Always use the recommended SD Card for your camera. Tactacam 5.0 requires UHS Speed
Class 3 (U3) to deliver the necessary write speed for cameras like the 5.0 that can shoot
4K and high-bitrate video. U3-certified SD cards must be able to maintain a minimum write
speed of 30MB/s to ensure that recording continues smoothly without any dropped frames.
You can use up to a 128GB card with the 5.0 Tactacam only.
Tactacam Fish-i, 4.0 and Solo WiFi cameras requires a class 10 or U1, 32, 64 or 128 GB
micro SD Card.
Please see more info on SD Cards at tactacam.com/support
Use one of the following methods to access videos located on your micro SD Card.
1. Using the provided USB cord connect your Tactacam to your computer. Power on
your camera to allow the computer and camera to communicate. You will see an icon on
CONTROLING YOUR CAMERA
(844) 482-2822
Advertisement
