Advertisement
usage in acceptable temperature ranges.
Wi-Fi
Note: Your camera functions can only be controlled by your phone when
your are connected to Wi-Fi. This setting lets you connect your camera to
the Tactacam FISH-i App for mobile remote connection. When wireless is on,
a blue LED appear by the wireless status icon just in front of the rec/power
button. The blue wireless LED will blink when not connected for 1 min then
power itself off. Once connected the blue LED will go solid. The Wi-Fi will
remain on throughout the lifetime of the battery.
Downloading the Tactacam FISH-i App:
1.
Download and open the Tactacam FISH-i APP from your App store on
your Phone or Tablet. Follow the App's on-screen instructions.
2. Connect to your Tactacam FISH-i
To turn on your Tactacam FISH-i Wi-Fi: While your Tactacam FISH-i is in
pause mode push and hold the Mode Button for 3 seconds. You will see
the blue LED indicator light turn on and start blinking.
3. From your mobile device's Wi-Fi setting select the FISH-i Wi-Fi network.
(There is no default password for your FISH-I Wi-Fi.) When connected, the
blinking blue LED lightt will become solid blue.
GETTING TO KNOW YOUR TACTACAM:
(844) 482-2822
Advertisement
