Table of Contents
Advertisement
HandPunch 1000 Installation and Operation Manual
7.0
Powering the HandPunch
Apply power to the HandPunch. The HandPunch's display lights up, the HandPunch
beeps almost immediately, and the display flashes the following information.
A series of setup screens appear and after a several second delay the HandPunch's
display shows the following information.
-
Depending upon how the HandPunch is configured, the "- ENTER ID -" string may be
replaced by a user-programmed string.
If the display remains blank, verify the power connections made to the HandPunch.
Page 26
FRONT PANEL
VERSION X.X
ENTER ID
TIME
DATE
-
Revision 1.2
Advertisement
Table of Contents
Need help?
Do you have a question about the HandPunch 1000 and is the answer not in the manual?