Klarstein 10033015 Manual page 50

EN
50
If the display flashes
• you have not placed a pan on the correct cooking zone or,
• the pan you re using is not suitable for induction cooking or,
• the pan is too small or not properly centered on the cooking zone.
No heating takes place unless there is a suitable pan on the cooking zone. The display
will automatically turn off after 1 minute if no suitable pan is placed on it.
Finish cooking
Touching the heating zone selection control that you
wish to switch off .
Turn the cooking zone off by slide along the "—" to
the left point.
Make sure the power display shows "0", then
shows "H". Turn the whole cooktop off by touching
the ON/OFF control.
"H" will show which cooking zone is hot to touch. It
will disappear when the surface has cooled down
to a safe temperature. It can also be used as an
energy saving function if you want to heat further
pans, use the hotplate that is still hot
alternately with the heat setting: