Klarstein 10033015 Manual page 46

EN
46
Cautions
WARNING
Risk of injury! The induction hotplate must be installed by qualifi ed
personnel or technicians. We have professionals at your service.
Please never conduct the operation by yourself.
• The hob will not be installed directly above a dishwasher, fridge, freezer, washing
machine or clothes dryer, as the humidity may damage the hob electronics.
• The induction hotplate shall be installed such that better heat radiation can be
ensured to enhance its reliability.
• The wall and induced heating zone above the table surface shall withstand heat.
• To avoid any damage, the sandwich layer and adhesive must be resistant to heat.
• A steam cleaner is not to be used.
Connecting the hob to the mains power supply
WARNING
Risk of injury! This hob must be connected to the mains power supply
only by a suitably qualifi ed person.
Before connecting the hob to the mains power supply, check that:
• The domestic wiring system is suitable for the power drawn by the hob.
• The voltage corresponds to the value given in the rating plate
• The power supply cable sections can withstand the load specifi ed on the rating
plate.
To connect the hob to the mains power supply, do not use adapters, reducers, or
branching devices, as they can cause overheating and fi re. The power supply cable
must not touch any hot parts and must be positioned so that its temperature will not
exceed 75 °C at any point.
Note: Check with an electrician whether the domestic wiring system is suitable
without alterations. Any alterations must only be made by a qualifi ed electrician.