Table of Contents
Advertisement
9. TROUBLESHOOTING
TROUBLE
CODE
Water inlet system failure
FF
F5
F3
Inability to discharge water
F2
F8
F1
FE
F7
F9
F6
The installation and repairing procedures should always carried out by the Authorised
Service Agent in order to avoid possible risks. The manufacturer shall not be held liable
for damages that may arise from procedures carried out by unauthorised persons. Repairs
may be carried out by technicians only. If a component has to be replaced, ensure that only
original spare parts are used.
Improper repairs or use of non-original spare parts may cause considerable damage and
put the user at considerable risk.
Contact information for your customer service can be found on the back of this document.
Function-relevant genuine spare parts according to the corresponding Ecodesign order can
be obtained from Customer Service for a period of at least 10 years from the date on which
your appliance was placed on the market within the European Economic Area.
POSSIBLE FAULT
Pressure system failure
Continuous water input
Heater error
Overflow
Faulty electronic card
Overheating
Diverter position error
Faulty heater sensor
Make sure the water inlet tap is open and water is flowing.
Separate the inlet hose from the tap and clean the filter of
Contact for service if the error continues.
Contact for service.
Close the tap and contact for service.
Water discharge hose and filters may be clogged.
Cancel the program.
If the error continues, contact for service.
Contact for service.
Unplug the machine and close the tap.
Contact for service.
Contact for service.
Contact for service.
Contact for service.
Contact for service.
EN - 24
WHAT TO DO
the hose.
Advertisement
Table of Contents
