Graphics Configuration; Pci Express Configuration - Asus EBE-4U User Manual

Turbo Mode
Configuration options: [Disabled] [Enabled]
C states
Allows you to enable or disable CPU Power Management. Configuration
options: [Disabled] [Enabled]
The following item appears only when you set C states to [Enabled].
Enhanced C-states
Allows you to enable or disable C1E. CPU will switch to minimum speed when all
cores enter C-state. Configuration options: [Disabled] [Enabled]
Package C State Limit
Set the maximum package C state limit. Configuration options: [C0/C1] [C2]
[C3] [C6] [C7] [C7S] [C8] [C9] [C10] [Cpu Default] [Auto]
[Cpu Default] Leaves to factory default value.
[Auto]
3.3.4

Graphics Configuration

This item allows you to select a primary display from IGFX and PEG graphical devices.
Primary Display
Allows you to select which of the IGFX/PEG Graphics devices should be the primary display
or select SG for switchable Gfx. Configuration options: [Auto] [IGFX] [PCI] [PEG]
Internal Graphics
Configuration options: [Auto] [Disabled] [Enabled]
[Auto]
[Disabled]
[Enabled]
3.3.5

PCI Express Configuration

This item allows you to configure PCI Express settings.
HYPER_PCIeX16
Configuration options: [Auto] [PCIe x8/x4/x4 mode]
3-6
Initializes to deepest available Package C State Limit.
Keeps IGFX enabled base on the setup options.
Disables internal graphics.
Enables internal graphics.
Chapter 3: BIOS setup