Bernini Mighty Power Shovel Owner's Manual

*PLEASE READ THESE INSTRUCTIONS COMPLETELY BEFORE ATTEMPTING TO ASSEMBLE/OPERATE YOUR NEW MIGHTY POWER SHOVEL
1. Assembling The Mighty Power Shovel
Storage
Bag
1. Remove the Shovel Head and Handle from the box, place the spring washer onto the handle threads and thread the end of the
handle into the Shovel Head making sure to tighten the tube until secure (Step 1).
NOTE: If desired you can leave your Mighty Power Shovel
store in the Mighty Power Shovel
Washer in a safe location (the original storage bag is a great place)
2. Extending your Mighty Power Shovel
To extend your Bernini® Mighty Power Shovel
identi ed by the lock icon and unlock icon. On the Shovel Neck there are two indented groves to select a chosen length.
Figure 1
Step 1: (Figure 1 Arrow) When shovel is
facing down, push down on lock collar,
while pushing down on lock collar,
extend your shovel to desired length,
release lock collar and shovel will auto
lock into place.
TM
Contents:
Handle
Shovel Head
Handle Spring Washer
Storage Bag. But if you disassemble your Mighty Power Shovel
TM
TM
, locate the Lock Collar. There are two positions on the lock collar, Lock and Unlock,
TM
UNLOCK
LOCK
Step 2: (Figure 2 Arrow) Choose one of
the two notches, once desired length is
selected move to step 3 (see Figure 5 A &
B).
50" Mighty Power Shovel
Please Note: During assembly
ensure that spring washer
is inserted on the threads
between the Shovel Head
and Shaft.
assembled or you can disassemble your Mighty Power Shovel
TM
UNLOCK
Figure 2
LOCK
www.berninifountains.com
O W N E R S M A N U A L
Step 1:
please store the Spring
TM
Figure 3
Step 3: (Figure 3 Arrow) Release lock
collar and shovel will auto lock into place.
Pro Tip: If the shovel is not locking into
place rotate the handle of your shovel
until the lock collar locks into place.
TM
TM
and
TM
UNLOCK
LOCK