Bernini Paolo Bird Feeder Instructions

Assembling The Bird Feeder

Figure 1
Step 1: Each Post has a matching length Post. Arrange the matching pairs of Posts in descending order (Figure 1).
Step 2: Starting with the tallest Post, screw the male coarse thread end into the Base (Figure 2).
Step 3: Take the matching Post and screw it onto the top of the Post you just screwed into the Base (Figure 3).
Step 4: Set the Bird Feeder Bowls (Figure 4a) onto the top of the assembled Post & secure with supplied wing nuts (Figure 4b).
Step 5: Repeat steps 2 - 4 for reaming Post and Bird Feeder Bowls in descending order (Figure 5).
June 2021 © Yeiser Research & Development LLC and Bernini
in this document are the trademarks or registered trademarks of Yeiser Research & Development LLC, Santee, CA 92071
Fine
Coarse
Figure 2
Paolo Bird Feeder Instructions
Figure 3
Fountains. Trade names, product names and logos used
®
www.berninifountains.com
Assembled
Figure 4a Figure 4a
Bird Feeder
Figure 4b Figure 4b
Figure 4
Figure 5