Respekta CH 1295 IXC N Operating & Installation Instructions Manual page 24

English
14. COMPONENTS OF STANDARD COOKER HOODS
Min. 65 cm
Max. 75 cm
5
8
1
9
5
Carbon filter required.
To switch to recirculation mode, remove the mode
selection block.
To do this, first disconnect the hood from the power
supply and remove the aluminum grease filters (4).
Then mount the carbon filter by guiding it to the filter
holder at the bottom of the motor and tightening it by
turning it clockwise. (Bayonet lock)
Wechseln Sie den Kohlefilter alle 3 Monate oder
früher, je nach Kochgewohnheiten.
fi210413xin
Installatio- / User's Instruction
EXHAUS AIR MODE (Factory setting)
2
4
3 5
7
10
13
CHANGEOVER TO CIRCULATION AIR MODE
(not included in delivery)
1 Hood body
1
2 Control panel
3 Glass steam screen
pivotally
4 Aluminium Grease filter
5 Filter fixing bolt
to open, push in direction of arrow
6 Filter mat*
7 Filter mat fixing
to remove, press ends of brackets down and
6
remove them from the anchorage
8 Upper exhaust air opening
11
9 Rear exhaust air
10 Upper exhaust air cover
11 Hood suspension eyelets
12 Rear exhaust air
13 Holes for locking screws
12
Change positioning flange (10) and blind cover
6
(12) where necessary
7
* depending on Model
Drawings/Pictures are for illustration purposes only
8
GB
bracket*
opening*
cover*
Mode‐
selection block