Philips FW-C150 Manual page 9

All manuals and user guides at all-guides.com
9
A AM Loop Antenna
Connection
Connect the supplied loop antenna to
the AM ANTENNA terminal. Place the
AM loop antenna far away from the
system and adjust its position for the
best reception.
B FM Wire Antenna
Connection
Connect the supplied FM wire antenna
to the FM AERIAL (FM ANTENNA)
300 Ω terminal. Adjust the position of
the FM antenna for the best reception.
Outdoor Antenna
For better FM stereo reception,
connect an outdoor FM antenna to the
FM AERIAL (FM ANTENNA) 300 Ω
terminal using a 300 Ω dipole wire.
FM AERIAL 300Ω FM ANTENNA 300Ω
OR
pg 01-28/C150/37-En 9
PREPARATION
C Speakers Connection D Connecting other
• Connect the right speaker to Front
terminal R, with the colored wire to
+ and the black wire to -.
You can connect the audio left and right
• Connect the left speaker to Front
OUT terminals of a TV, VCR, Laser Disc
terminal L, with the colored wire to
player, DVD player or CD Recorder to
+ and the black wire to -.
the AUX IN terminals at the rear of the
• Clip the stripped portion of the
system.
speaker wire as shown.
E AC Power Supply
After all other connections have been
12 mm
made, connect the AC power cord to
the system and to the wall outlet.
unlock lock
CAUTION:
– For optimal sound performance, it is
recommended to use the supplied
speakers.
– Do not connect more than one speaker
to any one pair of +/- speaker
terminal.
– Do not connect speakers with
impedance lower than the speakers
supplied. Please refer to
SPECIFICATION section of this manual.
Inserting batteries into the
equipment to your Remote Control
system
• Insert the batteries (not supplied)
into the remote control as shown in
the battery compartment (Type R06
or AA).
CAUTION
– Remove batteries if they are
exhausted or not to be used for a
long time.
– Do not use old and new or
different types of batteries in
combination.
– Batteries contain chemical
substances, so they should be
disposed off properly.
12/6/00, 2:18 PM
3139 115 20541 (ENG)