Philips FW-C150 Manual page 15

All manuals and user guides at all-guides.com
15
Discs for playback
This system can play all digital audio CD,
finalized digital audio CD-Recordable
and finalized digital audio CD-
Rewritable format discs.
Loading the CD Changer
1 Press CD to select CD mode.
2 Press OPEN•CLOSE.
™ The CD changer tray slides out.
3 Load a disc with the printed side up
in the right tray.
• You can load another disc in the left
tray.
• To load the third disc, press the
DISC CHANGE button.
™ The CD changer tray will rotate
until the empty tray is ready for
loading.
4 Press OPEN•CLOSE to close the
CD changer tray.
™ A lit on the respective CD
numeric flag indicates that its
corresponding disc(s) is loaded in
the disc tray.
Note:
– To ensure good system performance,
wait until the CD changer completely
reads the disc(s) before proceeding.
pg 01-28/C150/37-En 15
CD
• If you wish to change the inner disc
Disc Direct Play
during playback, press DISC
• You can play a disc directly by
CHANGE again.
pressing the DISC 1, DISC 2 or
™ "DISC CHANGE" will be
DISC 3 button. The CD player will
stop at the end of playback of the
™ The disc will stop playing.
selected disc.
™ The CD changer tray will close to
™ The corresponding CD numeric
flag starts to flash.
Playing a Disc
3 Press OPEN•CLOSE to close the
CD changer tray.
1 PressÉ to start playback.
™ A flashing on the CD numeric flag
indicates the selected disc.
Selecting a desired track
™ The track number and elapsed
Selecting a desired track when
playing time of the current track
playback is stopped
appear on the display.
1 Press í or ë until the desired
• To interrupt playback, pressÅ.
track appears on the display.
™ The playing time flashes.
2 PressÉ to start playback.
• To resume playback, press É again.
™ The selected track number and
2 To stop playback, press Ç.
Note:
– All the available discs will play once,
Selecting a desired track during
then stop.
playback
• Press í or ë until the desired
Disc Change
track appears on the display.
You can change the outer two discs
™ The selected track number and
while the third inner disc is stopped or
is playing.
• If you press í once it will skip to
1 Press DISC CHANGE.
™ The CD changer tray slides out. the beginning of the current track
2 Replace the discs in the left and right and play the track again.
disc trays.
Note:
– Pressing í during shuffling can only
skip to the beginning of the current
track.
displayed.
Searching for a particular
passage during playback
retrieve the inner disc and then
• Press and hold à or á until the
open again with the inner disc
desired passage is located.
accessible.
™ The volume will be reduced.
• Play returns to normal when à or
á is released.
Programming Tracks
Programming tracks of a loaded disc is
possible when playback is stopped. The
display will indicate the total tracks
stored in the program. Up to 40 tracks
can be stored in the memory in any
order. When 40 tracks are stored and
elapsed playing time appear on
you attempt to store another track, the
the display.
display will show "FULL".
1 Load the desired discs in the disc
trays.
2 Press PROGRAM to start
programming.
™ The PROG flag starts flashing.
elapsed playing time appear on
™ A flashing on the CD numeric flag
the display.
indicates the selected disc.
3 Press the CD (CD 1•2•3) or DISC
1/2/3 button to select the disc.
4 Pressí or ë to select the desired
track.
12/6/00, 2:18 PM
3139 115 20541 (ENG)