Philips FW-C150 Manual page 16

All manuals and user guides at all-guides.com
16
5 Press PROGRAM to store the
track.
• Repeat steps 3 to 5 to store other
discs and tracks.
6 Press Ç once to end programming.
™ The total number of tracks
programmed and total playing
time appear on the display.
Notes:
– If the total playing time is more than
"99:59" or if one of the programmed
tracks has a number greater than 30,
then "--:--" appears on the display
instead of the total playing time.
– If the system is reading the discs,
programming is not possible,
"READING" will be displayed and
followed by "DISC X". "X" is the
current read disc number.
– During programming, if no button is
pressed within 20 seconds, the system
will exit program mode automatically.
– "SELECT A DISC" will be displayed
when programming an empty disc slot.
Reviewing the program
Reviewing of the program is possible
only when playback is stopped.
• Pressí or ë repeatedly to review
the programmed tracks.
• Press Ç to exit review mode.
pg 01-28/C150/37-En 16
CD
Note:
Playing the program
– The program will be erased when the
1 Press É to start program playback.
system is disconnected from the power
™ "PLAY PROGRAM" will be
supply or when the CD changer tray is
displayed.
opened.
™ The track number and elapsed
playing time of the current track
Shuffle
will appear on the display.
• If you press REPEAT during In shuffle mode, the system plays all the
program playback, the current track available discs and their tracks in
or all programmed tracks will be random order. Shuffle may be used also
played repeatedly. when tracks are programmed.
™ "TRACK" or "PROGRAM" will be
To shuffle all the discs and tracks
displayed.
1 Press SHUFFLE.
™ The REP and PROG flags appear
™ "SHUFFLE" will be displayed.
on the display.
™ The SHUF flag and the track
2 Press Ç to stop program playback.
Notes:
– If you press any of the DISC DIRECT • The discs and the tracks will be
PLAY buttons, the system will play the played in random order until you
selected disc and the stored program pressÇ.
will be ignored temporarily. The PROG • If you press REPEAT during
display also will disappear temporarily shuffling, the current track or all
from the display. It will reappear when available discs will be played
playback of the selected disc ends. repeatedly.
™ "TRACK" or "ALL DISC" will be
– REPEAT DISC mode will be cancelled
when program playback begins.
™ The REP and SHUF flags appear
Erasing the program
(when
2 Press SHUFFLE again to resume
playback is stopped)
normal playback.
• Press Ç.
™ The SHUF flag disappears from
™ "PROGRAM CLEARED" will be
displayed.
Note:
– REPEAT DISC mode will be cancelled
when shuffle is selected.
Repeat
You can play the current track, a disc or
(only on remote control)
all available discs repeatedly.
1 Press REPEAT on the remote
control to select the various repeat
modes.
™ "TRACK", "DISC", "ALL DISC"
or "OFF" will be displayed.
™ The REP flag appears on the
display.
• The selected track, selected disc or
selected at random appear on the all available discs will now be played
display. repeatedly until you pressÇ.
2 Press REPEAT until the "OFF"
mode is displayed to resume normal
playback.
™ The REP flag disappears from the
display.
Notes:
– REPEAT DISC mode is not available
during program play or shuffle mode.
displayed.
– You can also repeat shuffling a
program.
on the display.
i) "TRACK" or "PROGRAM" will be
displayed.
ii) The REP, PROG, and SHUF flags
appear on the display.
the display.
12/6/00, 2:18 PM
(only on remote control)
3139 115 20541 (ENG)