Advertisement
Available languages
Available languages
Quick Links
Remote Control/Relay
No. 30-9511, model LD-SCB01
Please read the entire instruction manual before using and save it for future use.
We apologise for any text or photo errors and any changes of technical data.
If you have any questions concerning technical problems please contact our
Customer Service Department.
Product Description
Black
Green
1
2
1. Relay
2. Power switch forward/reverse
3. Power switch bracket
4. Cable between relay and power switch
Specifications
Voltage:
12 V
Max. current:
100 A
GREAT BRITAIN For consumer contact, please visit www.clasohlson.co.uk and click on customer service. Internet: www.clasohlson.co.uk
4
Red
To ignition
3
Installation Instructions
Position the relay (1) close to the battery and in such a way that it is protected from
damp and dirt as much as possible. Check that the connections are sufficiently far
away from the chassis and other metal parts and that tools and other loose objects
cannot come in contact with the connections on the relay.
Position the power switch (2) where it can easily be used and is not in the way of
any other controls. Position it on one of the handlebars and check that the handle-
bars can move completely in either direction without being obstructed by the power
switch or the cable.
DO NOT route the cables on top of sharp edges, moving parts, hot parts or where
they can become kinked or damaged. Secure loose cables with plastic ties or elec-
trical tape.
Wiring Instructions
Winch
Plus terminal
(+) on battery
Connect the green and black cable from the power switch (2) to the cable with cor-
responding colours on the relay (1).
Connect the red cable from the power switch (2) to a cable that is controlled by the
ignition. The cable should only be live when the ignition is on.
Connect the plus (+) and the minus (–) terminals on the battery as shown in the
illustration.
It can be difficult to ascertain the polarity of the winch, the only way is to test it.
Connect the winch to the outer connections on the relay and test the winch. Re-
verse the cables if the rotation of the winch does not correspond to the markings
(IN/OUT) on the power switch (2).
Disposal
Follow local ordinances when disposing of this product. If you are unsure about
how to dispose of this product contact your municipality.
Minus terminal (-)
on battery
Winch
Advertisement
Related Manuals for Clas Ohlson LD-SCB01
Summary of Contents for Clas Ohlson LD-SCB01
- Page 1 Remote Control/Relay Installation Instructions No. 30-9511, model LD-SCB01 Position the relay (1) close to the battery and in such a way that it is protected from Please read the entire instruction manual before using and save it for future use.
- Page 2 Fjärrstyrning/relä Monteringsanvisning Art.nr 30-9511, modell LD-SCB01 Placera reläet (1) nära batteriet och så skyddat som möjligt för fukt och smuts. Se Läs igenom hela bruksanvisningen före användning och spara den sedan för till att dess anslutningar har tillräckligt stort avstånd till chassi eller andra metallde- framtida bruk.
- Page 3 Fjernstyring/relé Monteringsanvisning Artikkelnummer: 30-9511, modell: LD-SCB01 Plasser reléet (1) nær batteriet, og godt beskyttet fra smuss og fuktighet. Påse at tilkoblingene har tilstrekkelig stor avstand til chassis og andre metalldeler. Pass Les hele bruksanvisningen grundig, og ta vare på den til seinere bruk.
- Page 4 Kauko-ohjaus/rele Asennusohjeet Tuotenumero 30-9511, malli LD-SCB01 Aseta rele (1) akun lähelle lialta ja kosteudelta suojattuun paikkaan. Varmista, että Lue käyttöohjeet ennen tuotteen käyttöönottoa. Säilytä käyttöohjeet tulevaa tar- sen liitännät ovat riittävän kaukana kotelosta tai muista metalliosista. Varmista li- vetta varten. Pidätämme oikeuden teknisten tietojen muutoksiin. Emme vastaa säksi, etteivät liitännät joudu kosketuksiin työkalujen tai muiden esineiden kanssa.