Oransi max User Manual page 8

A I R P U R I F I E R O V E R V I E W
Air Quality Sensor (AQS)
Measures and displays the air quality. In Auto Mode, the unit automatically adjusts its
fan speed based upon the air quality reading. There are five levels of air quality as
indicated above.
Excellent Very
Good Standard Poor
Good
NOTE: The air quality reading is located above the AQS. Since the air quality sensor is
located on the air purifier the reading will be in the area of the air purifier. In many
cases it will have a reading of Excellent or Very Good.
Placement
In order to get better performance in cleaning, it is recommended to place the purifier
on the ground or a stable surface. Since the air is drawn in through the front of the air
purifier it can be placed near a wall.
Standby
In Standby Mode, the Standby indicator illuminates in red to show the air purifier has
been plugged in and has power but is not operating.
Refresh Anions
The Refresh icon will be illuminated on the panel when the Ionizer feature is activated.
You can turn this off by pressing the Anion button. In Auto Mode, the Ionizer will
always automatically be on and producing negative ions, indicated by "Refresh."
Fan Speed
There are four different fan speeds with Silent the lowest and Turbo the highest fan
speeds.
Auto Mode
In Auto Mode, the unit will run at the lowest fan speed. If the AQS detects a change in
the density of particles in the air, the unit will increase the fans speed. Once the AQS
detects it has cleaned the dense particles out of the atmosphere it will return to the
lowest fan speed.
Check Filter
When the purifier has run for a total time of 3,000 hours, the maintenance indicator
illuminates to remind the user to vacuum the pre-filter and to look at the HEPA Filter.
The HEPA Filter has a color shade on the frame to see whether it is time to be
08
replaced.