Silent Alert MM4A-2212-EU-LEAD Quick Start Manual

Quick start guide MM4A-2212-EU-LEAD
Mini Monitor with Lead

PM2 Activation

Configuration
PUSH
switch Cover
S i lent
Alert
TM
PUSH
Pressure pad
2.
The monitor is activated using an under carpet
pressure pad (PM2).
Plug the PM2 plug into the socket on the monitor.
The connection can be taped for added security
The monitor may transmit the first time the connection is
made, this is normal.
4.
The pad can be placed under a rug at a doorway or
PUSH
i S lent
Alert TM
Silent Alert International
Screw cap
Status light
Test button
CCD4A-2220-EU
CARE CALL
MINI MAGNETIC
DOOR MONITOR
USE ALKALINE PP3
9 V BATTERY ONLY
Batch 06/01/14
www.silentalert.ie
Silent Alert International, IRL
Tel: +353 (0)1 247 9007
Keys 1-4 System
PP3 battery
Channel
Key 5=10 Sec Delay
Key 6=20 Sec Delay
Keys 5+6=30 Sec Delay
contacts
Key 7 Leave ON
Key 8 Not Used
USE WITH MAGNET SUPPLIED
Screw cap
socket
Configuration switches shown
with cover removed. Do not alter
these without referring to page 2
if required.
beside a bed
Any questions? Call us on +353 (0)1 247 9007
1.
Install a 9 volt PP3 alkaline or lithium battery
making sure to observe the correct polarity.
CCD4A-2220-EU
CARE CALL
MINI MAGNETIC
DOOR MONITOR
USE ALKALINE PP3
9 V BATTERY ONLY
Batch 06/01/14
PP3 Battery www.silentalert.ie
Silent Alert International, IRL
Tel: +353 (0)1 247 9007
Keys 1-4 System
Channel
Key 5=10 Sec Delay
Key 6=20 Sec Delay
Keys 5+6=30 Sec Delay
Key 7 Leave ON
Key 8 Not Used
USE WITH MAGNET SUPPLIED
To repeat the battery check remove the battery, press the test
button then re-insert the battery to start the sequence again.
3.
Place the pad under the carpet ensuring the pad is
When installing the pad make sure the cable can't
5.
As the user stands on the carpet directly above the
pad the monitor will send a signal to the
www.silentalert.ie
S i lent
Alert
Alert
When a battery is first fitted the
indicator light will flash red then
green a few times.
PUSH
The light will then will flash
green several times to show the
battery voltage.
9 flashes = 9Volts in the battery.
PUSH
If the light flashes red at this
point the battery is flat
and will need to be replaced.
PUSH
not folded.
WARNING
cause a trip hazard.
Pager or SignWave.
+353 (0)1 247 9007
TM