Matco Tools SRVSADJ Owner's Manual

SRVSADJ_manual_012_10872.00 __ 04-16-2021
Save This Manual For Future Reference
ADJUSTABLE HEIGHT SERVICE STOOL
DESCRIPTION
Adjustable Height Service Stool seat height is adjustable from
29˝ to 33˝. Seat is 14˝ wide and 13˝ deep. Seat provides comfort,
strength and easy maintenance. Seat has forward seat tilt.
Reinforced round steel base. Stool has 300 pound weight
capacity.
ASSEMBLY
1. Unpack your stool and account for all parts.
2. Place base (Key No. 1) onto floor and insert foot ring (Key
No. 2) into center of base. Push down on foot ring and allow it
to wedge firmly into place.
3. Insert lift assembly (Key No. 3) into top hole of foot ring and
press firmly into place. Remove cap from top of lift assembly.
Do NOT push on button at the top!
3. Install seat on top of lift. Align hole in control assembly (Key.
No. 5) with top of lift. Push down on seat (Key No. 6) to insert
firmly together.
ADJUSTING SEAT ANGLE AND HEIGHT
1. Raise handle under right side of seat and tilt seat to desired
angle. Lower handle to lock seat at desired angle.
2. Raise handle under left side of seat to move seat to desired
height. Lower handle to lock seat at desired height.
GENERAL SAFETY INSTRUCTIONS
• Do not stand on seat.
• Stool must be on level surface to ensure proper stability.
• Only use stool when fully assembled.
• Periodically check fasteners and tighten securely if needed.
• Never use stool if it does not perform according to this
manual.
• Do not exceed stool maximum weight capacity of
300 pounds.
MAINTENANCE
Pneumatic lift in lift assembly is permanently lubricated at
factory and needs no further lubrication. Never lubricate
pneumatic lift. Do not remove clip from bottom of lift assembly.
Contact Matco Tools immediately if clip is missing or damaged.
Part No. 10872.00 Sold by Matco Tools, 4403 Allen Road, Stow, OH 44224-1096
.
OWNER'S MANUAL
INDUSTRIAL SEATING LIMITED WARRANTY
Product is warranted against mechanical or structural failure due
to defective material or workmanship for 1 year. Provided
however, this warranty lasts only so long as you own your
product. If you sell or otherwise transfer the product this
warranty terminates automatically. Products that are damaged
or made unserviceable by accidents, abuse, misuse or are
altered in anyway are not covered by this warranty.
Matco Tools reserves the right to replace or recondition at its
option, any units covered by this warranty. All return shipments
require Material Return Authorization and must be freight
prepaid unless otherwise approved in writing.
If any product covered under this warranty fails to meet the
terms of this warranty or it is in any respect broken, defective
or missing parts, please call us immediately at toll free
1-866-289-8665. Any attempts to make unauthorized repairs
will void this warranty in every respect.
This warranty gives you specific legal rights. You may have other
rights which vary from state to state, however such implied
rights are limited to a period of one year from the date of your
initial purchase. Some states do not allow limitations on how
long an implied warranty lasts, so the above limitation may not
apply to you.
Matco Tools will in no event be liable for incidental or conse -
quential damages for any amount in excess of the original
purchase price. Some states do not allow exclusion or limitation
of such damages, so the above limitation or exclusion may not
apply to you.
HOW TO ORDER REPAIR PARTS
When ordering repair parts or reporting problems, always
give the following information:
NAME OF ITEM
Adjustable Height Service Stool
PART DESCRIPTION
_______________________________
All parts listed may be ordered from Matco Tools® Customer
Service at 1-866-289-8665.
.
Model No.
SRVSADJ
MODEL NUMBER
SRVSADJ
PART NUMBER
_______________
April 2021