Running Belt Adjustment - Echanfit CTM5001N User Manual

RUNNING BELT ADJUSTMENT

Warning:
ALWAYS UNPLUG THE TREADMILL FROM THE ELECTRICAL OUTLET BEFORE
CLEANING OR SERVICING THE UNIT.
Clean:
General cleaning the unit will greatly prolong the treadmill.
Keep treadmill clean regularly. Be sure to clean the exposed part of the deck on either side of the
walking belt and also the side rails. This reduces the build up of foreign material underneath the walking
belt by wearing the clean running shoes.
Warning:
Always unplug the treadmill from the electrical outlet before removing the motor
cover. At least once a year remove the motor cover and vacuum under the motor cover.
RUNNING BELT AND DECK LUBRICATION
This treadmill is equipped with a pre-lubricated, low maintenance deck system. The belt/ deck friction
may play a major role in the function and life of your treadmill, thus requiring periodic lubrication. We
recommend a periodic inspection of the deck. You need contact with our service center if you find the
damage of the deck.
We recommend that lubricate the deck according to the following timetable:
➢
Light user (less than 3 hours/ week)
➢
Medium user (3-5 hours/ week)
➢
Heavy user (more than 5 hours/ week)
We recommend that you buy the lubrication from our distributor or directly to our company.
Attention: Any repair needs professional technician.
1. We suggest that you should cut off the power for 10mints after keep running 2HS, so that it's good for
maintain the treadmill.
2. For avoiding the slipping during running, the belt not too loose, for avoiding the more abrasion
between the roller and belt and maintain the machine's good running, the belt not too tight. You can
adjust the distance between plates and belt, the belt be away from the plates about 50-75mm on both
sides, if the best not too tight nor loose.
annually
every six months
every three months
- 17 -