Echanfit CTM5001N User Manual page 13

At the end of the program mode the treadmill will flash with 15 beeps, after which all data
will be cleared to 0 and come into standby status.
5. HEART BEAT TEST
When holding the hand pulse by two hands, the pulse window will show your heart beat after 5 seconds.
In order to get an accurate heartbeat value, please holding the hand pulse more than 30 seconds to test
when the machine stop. The heart beat data is just for reference, cannot be as the medical data.
6. BODY FAT TEST
When the treadmill standby, press 'PROG' button till 'FAT' shows in the speed window. 'FAT' is body fat
test mode. Press 'MODE' to choose parameter 'SEX / AGE / HEIGHT / WEIGHT', and TIME/DIST
window will show "-1-"，"-2-"、"-3-""-4-". When set each parameter, press SPEED +/- to adjust the data,
and CAL/PULSE window will show the data and press 'MODE' button to finish, the window will show
"-5-" and "---" enter into ready to go condition. Hold the handle pulse with two hands, it will show your
BMI data after 5 seconds.
6.1. Data display and set range
Parameter Type
SEX（-1-）
AGE（-2-）
HEIGHT（-3-）
WEIGHT（-4-）
6.2. BMI reference
（BMI）
<19
19--26
26--30
>30
Default
0（MALE）
25
67 in
154LBS
Meaning
Under weight
Normal weight
Over weight
Obesity
- 12 -
Setting Range
0—1
10—99
40—95 in
44—352LBS
Mark
0= MALE 1= FEMALE