TIMER SETTING
By inserting the timer, the lock will open after an established time
everytime it is closed.
To set the timer please follow the instructions below:
With the lock "OPEN" press the button
issued 2 short flashes and 1 longer.
Insert the 6 digits passepartout code in use and press the button
If the passepartout code is correct, the led will turn on for 3 seconds.
When the led turns off press the button
Insert after how many hours the lock must automatically open by using the
numeric keyboard (from 1 to 99 hours) and press the button
For disconnecting the timer proceed as above and insert "0" as value of the hours.
Example: If you wish the lock opens after 8 hours press the button 8 and the button
If you wish the lock opens after 12 hours press the button 1, the button 2 and
the button
The led will shortly flash 2 times every 2 seconds to indicate that the lock is
closed with the timer "ON".
.
ENT
and release it only after the led has
ENT
ENT
.
ENT
PAGE 3