Advertisement
'Wraith'
Pebble & Log
Effect Inset Decorative Electric Fire
"This Product is only suitable for well insulated spaces or occasional use."
Users Operating
Instructions
Having installed the appliance, the
installer should take the necessary steps
to ensure that the user fully understands
how to operate the appliance and is also
made aware of the fire's basic cleaning
and maintenance requirements.
Advertisement
Table of Contents
Related Manuals for Legendfires Wraith
Summary of Contents for Legendfires Wraith
- Page 1 ‘Wraith’ Pebble & Log Effect Inset Decorative Electric Fire Users Operating Instructions Having installed the appliance, the installer should take the necessary steps to ensure that the user fully understands how to operate the appliance and is also made aware of the fire’s basic cleaning and maintenance requirements.
-
Page 2: Installation Requirements
INSTALLATION REQUIREMENTS IMPORTANT - PLEASE READ BEFORE USING YOUR PRODUCT 1. This product must be left in its final position for at least one hour to acclimatise to your room temperature before use. 2. Do not position this product near to a bath, shower or a swimming pool. 3. - Page 3 • If the plug or the supply cord is damaged it must be replaced by a new cord or assembly available from the manufacturer or service agent. • Replace fuses only with fuses of the correct size and rating. Electrical Connections This appliance must only be connected to a 230/240 volts AC 50Hz supply.
-
Page 4: Installation Instructions
INSTALLATION INSTRUCTIONS Anti-tilt Remove the fire trim and position the fire in the desired Bracket location secure the fire to the wall, using suitable fixings in the six fixing holes provided in the fire flange, an anti- tilt bracket is fitted to the top of the fire to be used when fitting in an existing fireplace, when secure re-fit the fire trim and place the lose coals, pebbles onto the coal support as shown. - Page 5 USER INSTRUCTIONS Plug in the fire and ensure it is switched on at the mains. To operate the fire (Fig. 1) Ensure the switch is in the on (I) position. This will illuminate the fire when no heat is required. This switch will also need to be on to use any of the elements.
- Page 6 SERVICING Servicing the fire Only a competent person should service this appliance. It is recommended that the appliance should be serviced every 12 months. WARNING: Before carrying out servicing, ensure that Pebbles the power supply cord is removed from the mains wall socket.
- Page 7 GUARANTEE CONDITIONS OF WARRANTY If this appliance should prove to be defective due to faulty design, materials or workmanship within 12 months of purchase, the product will be repaired free, subject to the following conditions. 1. The electric fire shall have been purchased and used solely within the UK for domestic purposes and in accordance with the Users Operating instructions.
-
Page 8: Important Warranty Information
IMPORTANT WARRANTY INFORMATION Please retain these details for future reference. For you records Model Name: Serial Number: Purchased from: Installation Date: SERVICE RECORD Company Engineers Signature Date Service Service Service Service Service Unit 404 Glenfield Park Business Centre Blakewater Road Blackburn Lancashire BB1 5QH...
Need help?
Do you have a question about the Wraith and is the answer not in the manual?
Questions and answers