Table of Contents
Advertisement
Quick Links
Untitled Document
Get ready
To upgrade the firmware for the Coolpix 2100, you will need:
•
A Coolpix 2100 digital camera
•
A UC-E6 USB cable
•
One of the following power sources:
- An EH-61 AC adapter
- A new CRV3 battery
- Two fully-charged EN-MH1 rechargeable batteries
•
A Nikon-approved CompactFlash memory card that has been formatted in the Coolpix 2100
The Nikon Guide to Digital
•
Photography for the
Coolpix 2100
Check the current firmware version for the Coolpix 2100
1
Rotate the mode dial to SETUP.
2
Press and hold the MENU
button while turning the
camera on.
file:///K|/2100fwMAC.html (1 of 7) [6/22/2010 12:02:59 PM]
Upgrading the Coolpix 2100 Firmware
Macintosh
Thank you for choosing a Nikon product. This guide describes how to upgrade the
camera firmware for the Coolpix 2100.
a CompactFlash card reader
OR
Advertisement
Table of Contents
Related Manuals for Nikon Coolpix 2100
Summary of Contents for Nikon Coolpix 2100
- Page 1 Untitled Document Upgrading the Coolpix 2100 Firmware Macintosh Thank you for choosing a Nikon product. This guide describes how to upgrade the camera firmware for the Coolpix 2100. Get ready To upgrade the firmware for the Coolpix 2100, you will need: •...
- Page 2 Untitled Document "E2100 V" will be displayed in the monitor, followed by the version number of the current camera firmware. If the monitor shows "E2100 V1.0", the current camera firmware is version 1.0. This upgrade can be used with firmware versions 1.0 or earlier. Turn the camera off.
- Page 3 The firmware can be copied to the camera memory card either by connecting the computer directly to the Coolpix 2100 using the USB cable, or by removing the memory card from the camera and inserting it in a CompactFlash card reader.
- Page 4 Insert the formatted memory card into the card reader. If Nikon View has been installed on the computer, Nikon Transfer will start automatically and display the message, "There is no selected transfer image in the camera or on the card." Click OK to exit Nikon Transfer.
- Page 5 Disconnect the card reader. For more information, see the documentation provided with the card reader. Update the camera firmware Should any of the following occur during the update, the Coolpix 2100 could become inoperable: • The memory card is removed from the camera •...
- Page 6 7-2. Check the camera firmware version as described in Step 2, "Check the current firmware version for the Coolpix 2100." 7-3. If "E2100 V1.1" is displayed in the monitor, the update was successful. If the update was not successful, contact a Nikon service representative. file:///K|/2100fwMAC.html (6 of 7) [6/22/2010 12:02:59 PM]...
- Page 7 Restore the USB option to its original setting. If you changed the USB setting from PTP to Mass Storage to update the camera firmware, return to the USB menu and select PTP. See the Nikon Guide to Digital Photography with the Coolpix2100 for details.
Need help?
Do you have a question about the Coolpix 2100 and is the answer not in the manual?
Questions and answers