Guest Room Example - Philips dynalite DDRC-GRMS-E Commissioning Manual

Signify Classified - Internal
1.6

Guest room example

The plan below is an example of a guest room installation.
4
6
5
3
1. Bedside lamps / button panels
2. Room lighting
3. Corridor/Entrance lighting
4. Bathroom lighting / button panel
5. Keycard slot / master button panel
This plan shows a typical guest room layout with lights, button panels, blinds and General Power Outlets. The
controller is designed to manage all of these inputs and outputs, as well as offering the flexibility to handle
custom room configurations and requirements.
The controller has 18 dry contact inputs that are used to trigger different pre-programmed functions. These inputs
are triggered by momentary switches or voltage-free button presses.
In the example above, the keycard slot signals the occupancy state of the room. The master and bedside button
panels control the corridor and overall room lighting. A bathroom button panel controls the bathroom lighting.
March 5, 2019
7
1
2
9
6. Room status indicator
7. HVAC
8. Motorized blinds
9. General Power Outlets (GPO)
www.lighting.philips.com/dynalite
DDRC-GRMS-E
.......................................
Commissioning Guide
.......................................
Page 7
.......................................
8