Product Overview; Introduction; Features - Philips dynalite DDRC-GRMS-E Commissioning Manual

Signify Classified - Internal
1

Product overview

1.1

Introduction

The DDRC-GRMS-E relay controller offers a flexible, low cost solution for networked guest room automation. The
controller enables a room's look and feel to adapt as guests enter and leave the room, and allows them to easily
control all room functions.
GRMS relay controllers are designed to manage all controls within a hotel room, responding to inputs from
sensors, user interfaces and third-party property management systems (PMS), as well as managing the switching
of lights, General Power Outlets (GPOs), HVAC systems, and motorized blinds. It includes DMX control of colored
lights and switching control of LED room status indicators via the digital outputs. Additionally, the controller's 18
dry contact inputs provide an interface with third party user interfaces and sensors in the room.
This controller is a self-contained unit and includes its own power supply, relays, processor and Ethernet bridge.
It is a network device, able to communicate with Dynalite software and devices via DyNet over RS-485 or TCP/IP.
1.2

Features

The DDRC-GRMS-E relay controller includes the following features:
•
Standalone or networked operation
•
Power relays that can disconnect power to the room's General Power Outlets and air conditioning when
the room is unoccupied
•
Pre-programmed functions for common scenarios such as Room Occupied/Unoccupied
•
Directional control for motorized blind operation
•
Default factory configuration linking dry contact inputs and control channel outputs to cover all basic
guest room requirements
Configuration options are explained in Chapter 2 of this guide, and custom pre-configuration is available from
Dynalite prior to shipping.
March 5, 2019
DDRC-GRMS-E
.......................................
Commissioning Guide
.......................................
Page 5
.......................................
www.lighting.philips.com/dynalite