Signify Classified - Internal
DDRC-GRMS-E
.......................................
Commissioning Guide
.......................................
Page 12
.......................................
2.3
Factory Set
To return a controller to its default factory settings, right-click the device in Physical View or Network View and
Factory Set..., then click OK.
select
2.4
Device Properties
The Device Properties editor displays information and basic device configuration for the controller.
Standard properties are shown in bold italics.
Advanced properties are shown in italics.
Device Identification
Property
Device Name
Location
Description
Box number
Serial number
Device location sequence
IPv4 Address
IPv6 Address
March 5, 2019
Description
Used to identify the device.
The physical location of the device.
Other identifying information for the device.
Used by the Dynalite system to identify the device.
The serial number of the device.
Identifies devices sequentially on a series network, not required.
The device's static IP address when connected to a LAN.
Note that only the IPv4 address is editable, and that DHCP is not
supported for IPv4.
www.lighting.philips.com/dynalite