Safety Notices; Electrical Safety Information - UniFi USW-Flex-Mini Quick Start Manual

18/10/21, 11:42
PoE In Interface
Max. Power Consumption
Power Method
Power Supply
Voltage Range
USB Type C
802.3af/at PoE
LEDs
System
RJ45 Data Ports
ESD/EMP Protection
Operating Temperature
Operating Humidity
Certifications

Safety Notices

1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Only use attachments/accessories specified by the manufacturer.
WARNING:
least 20 mm of clearance next to the ventilation holes for adequate airflow.
WARNING:
rain or moisture.
WARNING:
WARNING:
remote risk of electric shock from lightning.

Electrical Safety Information

1. Compliance is required with respect to voltage, frequency, and current requirements
indicated on the manufacturer's label. Connection to a different power source than those
specified may result in improper operation, damage to the equipment or pose a fire
hazard if the limitations are not followed.
2. There are no operator serviceable parts inside this equipment. Service should be
provided only by a qualified service technician.
dl-origin.ubnt.com/qsg/USW-Flex-Mini/USW-Flex-Mini_EN.html
USW-Flex-Mini
USW-Flex-Mini Quick Start Guide
* Included only in the single-pack of the USW-Flex-Mini.
Failure to provide proper ventilation may cause fire hazard. Keep at
To reduce the risk of fire or electric shock, do not expose this product to
Do not use this product in location that can be submerged by water.
Avoid using this product during an electrical storm. There may be a
USW-Flex-Mini Quick Start Guide
802.3af/at PoE (Pins 1, 2+; 3, 6-)
802.3af/at PoE (44 - 57VDC, 0.05 - 0.04A)
± 16kV Air, ± 12kV Contact
2.5W
USB Type C, 5V
5V, 1A Power Adapter*
4.7 - 5.2VDC
44 - 57VDC
Status
Link/Speed/Activity
-5 to 45° C (23 to 113° F)
10 to 90% Noncondensing
CE, FCC, IC
6/8