Outdoor Revolution Ozone Instructions & Care Manual page 3

PLEASE READ THE FOLLOWING ERECTION
INSTRUCTIONS CAREUFULLY
TIP: Refer to the photograph to help when pitching your Ozone Canopy
1. Spread the flysheet out on the
ground with the long zip laid near
the front of your already pitched
tent.
3. Locate the steel pole and attach all
the pieces together.
2. Zip the canopy on to the front of
the tent using the already sewn on
zip.
4. Next, thread the pole through the
sleeve and insert the metal pin from
the ring and pin in to the bottom of the
pole on both sides.
4
5. Clip all the black plastic 'c' clips on to the
pole at either side.
7. Peg out all the remaining pegging
points and guy lines starting from one
corner and work your way round.
6. Peg out and tension the canopy. Use
the adjustable pegging straps to tension it
as you desire. Make sure you don't over
tension the fabric. If a door zip is too
tight, release some tension before
closing, never force the zip.
8. Finally. peg out the Reflective Endur-
ance Storm Straps for extra stability.
Please make sure in heavier weather you
use all the guy lines and storm straps to
hold the canopy in place.
5