Outdoor Revolution Navigator Kombi Instructions

Outdoor Revolution

Thank you for purchasing an Outdoor Revolution product, this product will give years

of satisfactory service if basic instructions are followed, our products are designed for

Spare poles can be purchased to replace broken poles

** Porch awnings will not be swapped because of broken poles**

Please read the following instructions carefully

TIP: Refer to the photograph to help when pitching your Navigator Kombi.

Please do not leave for your vacation without fully erecting and checking the contents of your

•

porch.

Ideally erect your porch for some period allowing it to weather.

•

Please make sure that before erecting, that you site the porch on clear Level ground with no sharp

•

objects underneath, and that all the zips are fully closed. (We recommend laying a groundsheet

down to keep the awning Dry and clean)

If you have any issues relating to pitching your awning please contact your dealer for instructions

•

before going on holiday.

(Make yourself familiar with the awning and its parts before attempting to erect)

durability and for ease of erection

IMPORTANT PLEASE CHECK YOUR EQUIPMENT

Flysheet (or outer)

4 x Fibreglass poles (in a separate bag)

Pegs (in a separate bag)

Outer carrying bag (with dimension details)

Stability Straps x 2

Groundsheet

A selection of spare parts

MODEL Navigator Kombi

Table of Contents

Need help?

Do you have a question about the Navigator Kombi and is the answer not in the manual?

Page 1 Outdoor Revolution MODEL Navigator Kombi Thank you for purchasing an Outdoor Revolution product, this product will give years of satisfactory service if basic instructions are followed, our products are designed for durability and for ease of erection Spare poles can be purchased to replace broken poles...
Page 2 ***Note, to attach the Navigator Kombi to a Motorhome Fiamma/Omnistor you will need to purchase a driveaway kit consisting of double edged awning piping an figure 8 joining strips. Simply slide into the awning rail, then the tent is lined up and the figure 8 is positioned to join the two.