Haier HAH 64 EXCP User Manual page 68

Heater
display
F0 Touch control software error.
Touch control zone is too hot and has
Fc
turned off all the heaters.
Touch control temperature sensor can
Ft
be damaged.
Touch control temperature sensor can
FE
be damaged.
Excessive sensitivity
Fb
On any key.
FU / FJ Security keyboard error
FA Security keyboard error
FC / Fd Security keyboard error
Fr Relays security error
Fault
If error has occurred disconnected and connect again the cooktop to
the power supply. If error persist, call after-sales service. If error
appears suddenly in a normal operation, call after-sales service.
Wait until temperature goes down, Cook-top will be recoverd when
temperature reaches a normal value. When the message disappears,
the hob may be used again.
Wait until temperature goes down. If message persist when
temperature reaches an environment value, call after-sales service.
Wait until temperature goes down. If message persist when
temperature reaches an environment value, call after-sales service.
See if cook-top is mounted correctly. Be sure that keys touch
correctly the glass surface.
This error is a keyboard auto-check. It disappears when autocheck
return to secure value. If error persist, call after-sale service.
This error is a software auto-check. It disappears when auto-check
return to secure value. If error persist, call after-sale service.
This error is a software auto-check. It disappears when auto-check
return to secure value. If error persist, call after-sale service.
Any relay driver can have any problemn. Remove cook-top from the
power supply, wait a minute and switch on again. If error persist, call
after-sale service.
GB 68
Action