Advertisement
b. Connect the RJ-45 cable to the LAN/PoE Cable of the camera.
LAN/PoE Cable
c. Tightly screw the Cable Gland and Screw Cap to the Rugged RJ-45
Connector Cable.
d. Crimp the RJ-45 connector onto the RJ-45 network cable. Note that the
wires should be placed into the RJ-45 connector based on the following
order (from left to right).
Orange with white stripe
Orange
Green with white stripe
Blue
Blue with white stripe
Green
Brown with white stripe
Brown
7. Before screwing back the camera cover, remove the 3 old desiccant bags from
the inside of Camera Cover and replace them with the supplied Desiccant Bag.
Screw the camera cover back to the camera.
Remove the 3 desiccant bags
8. Now you can access the camera live view. See 4. Accessing the Camera.
3.2 EBN1240-S
1. Stick the Mounting Sticker on the surface to mark the 3 screw positions. Drill
3 screw-depth holes on the surface and then push the supplied 3 Screw
RJ-45 Cable
Screw Cap
Cable Gland
Stick the supplied desiccant bag
Note: Please screw back the
Camera Cover immediately
in case of reducing the
absorption capacity of the
desiccant bag inside the
camera body.
5
Advertisement
