Mitsubishi Electric PUMY-P112VKM4 Technical & Service Manual page 157

OPERATING PROCEDURE
13. Removing the reactor (DCL)
(1) Remove the service panel. (See Photo 1)
(2) Disconnect the lead wires from the reactor.
(3) Remove the 4 screws, that fix the reactor box.
(See Photo 13 or Figure 1)
(4) Remove the reactor box.
Note 1: The reactor is very heavy! Be careful when han-
dling it.
Note 2: PUMY-P•YKME4 model has 3 reactors.
OCH673D
PHOTOS/FIGURES
Photo 13: YKM4 model
Reactor box
Screws
Reactor
Screws
Figure 1: YKME4 model
Screws
Screws
157
4-way valve
4-way valve
Reactors