Table of Contents
Advertisement
DRIVER ASSIST TECHNOLOGIES
Rear Cross-Traffic Alert (RCTA)
This function detects a vehicle approaching
from either side as you reverse and provides
audible and visual warnings. Warnings will
appear in the upper corner of the Rear-Vision
Camera display and side mirrors, and audible
beeping will sound.
BSD/RCTA can be turned on or off in the
Center Information Display (CID):
1
Select the "Car Settings" icon.
2
In the "Driving Assistance" menu, select
"BSD/RCTA" to turn the function on or
off.
When this function is off, a yellow BSD/RCTA
OFF indicator will be displayed in Combination
Meter Display (CMD).
HIGH BEAM ASSIST (HBA)
This function uses the EyeSight
the headlights between high and low beam settings when an
oncoming vehicle is detected, enhancing safety for both you and
other drivers on the road.
To activate High Beam Assist, set the headlight control switch to the
"AUTO" position and push the headlight lever forward to the high beam position. The
green HBA indicator will illuminate on the Combination Meter. When vehicle speed is
above approximately 20 mph, HBA will automatically switch between high and low beams.
When the high beams are activated, the blue high beam indicator will be displayed in the
Combination Meter.
104
®
cameras to automatically switch
1
2
Advertisement
Table of Contents
