Power Science CF-1500-12 Series User Manual page 3

Inverter+charger+mppt supercombi
Table of Contents

Advertisement

WARNINGS
1. Do not expose the machine to the environment such as rain, moisture, mist,
dust, high temperature and so on or place it in the bilge.
2. Keep away from the fire and welding processes.
3. Use good quality wire with appropriate length and wire diameter. The
SuperCombi may be damaged and its performance would be reduced if the
wire does not meet the requirement.
4. Product contains internal components, which may bring electric arc and
sparks. In order to prevent fire or explosion, it is not allowed to install the
machine in the confined space with battery or inflammable material nearby.
5. When the chemicals inside of the batteries touch the skin or clothing, please
wash immediately with plenty of soapy water.
6. No smoking ,sparks or ignition engine near the batteries.
7. When using the metal tools, please be careful and do not drop it on the
batteries. The dropped metal tools may cause sparks or short circuit and
possible explosion of batteries.
8. When installing the batteries, please remove metal ornaments such as
rings, bracelets, necklaces, watches, and so on. The current generated by the
short circuit of the battery is very large, and it is possible to weld and burn the
metal, which can cause severe burns.
9. This product is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instructions
concerning the use of the appliance by a person responsible for their safety.
10. Batteries are always electrically live and must be treated with extreme
caution. They can supply high short circuit currents, even if they appear
damaged or undamaged.
11. Only charge battery types which are supported by this charger
12. Do not drop or shock the product, its accessories or batteries as this may
cause the product or battery to fail, catch fire or explode.
13. Ensure that the product is well ventilated, and make sure the fan is not
covered or obstructed.
14. Stay away from magnetic equipment. Radiation may erase the information
stored on this product causing it to become inoperative
15. Do NOT alter or disassemble the Battery Charger under any
circumstances. All services must be returned to PowerPlus for repair.
16. Use of an attachment not recommended or sold by PowerPlus may result
in a risk of fire, electric shock, or injury to persons
2

Advertisement

Table of Contents
loading

Related Products for Power Science CF-1500-12 Series

This manual is also suitable for:

Cfm-1500-12 series

Table of Contents