Advertisement
Available languages
Available languages
8
filling the hydraulic oil. If the oil level is lower than 12 mm from the edge of the hole, then you must
make up hydraulic oil. Recommended hydraulic oil with viscosity class 10 SAE. After topping up of oil
obezvazdushete. (See also item 3.1.).
Be careful during the topping up or changing the oil, it does not fall to dust or other contaminants.
5.2. Lubricated to prevent corrosion.
Piston rod of the power cylinder should be cleaned every three months with a clean cotton cloth
soaked in oil.
5.3. In the storage and prolonged non jack he must descend into extreme down position.
The first four digits of the serial number on the label of the jack means year of manufacture.
6. Environmental protection.
Hydraulic oil is a liquid that pollute the environment. Operations associated with the valley and
oil change should take measures against the accidental spillage of oil. Do not dispose of disused
hydraulic jacks household waste! In view of environmental protection in the transmission of secondary
raw materials, hydraulic oil to bleed into the office and for processing in accordance with the rules.
Prohibited to discharge of hydraulic oil into drains or open water sources.
Advertisement
