Download Print this page

Energy Saving Tips - Frigidaire GLEQ332CAS1 Operating Instructions

Frigidaire gleq332cas1: quick start

Advertisement

Available languages

Available languages

Cycle Selection
(continued)
Automatic Dry Cycle
• TOWELS - This setting is best for towel loads.
Select the HIGH HEAT temperature setting.
• REGULAR/WHITES - This setting is best for
cotton items. Select the HIGH HEAT temperature
setting.
• DELICATES/PERM PRESS/COLORS - This
setting is best for delicate, knit, or perm press
items. Select the MEDIUM HEAT temperature
setting for permanent press items, the MEDIUM-
LOW temperature setting for most knit items
(some models), or the LOW HEAT temperature
setting for delicate items.
• Occasionally a load may seem too damp or
overdried at the end of the cycle. To increase
drying time for similar loads in the future, set the
cycle selector on the indicator line to the left of
the TOWELS, REGULAR/WHITES, or
DELICATES/PERM PRESS setting. For loads
requiring less drying time, set the cycle selector
on the indicator line to the right.
• DAMP DRY - This setting is best for items you
wish to partially dry before hanging or ironing.
Select the temperature setting most suitable for
the load.
• COOL DOWN - If the dried load cannot be
removed promptly at the end of the cycle, the
cycle selector will automatically advance to the
COOL DOWN setting. Unheated tumbling
continues for 20 minutes to help reduce wrinkling.
When the Cycle Signal is on, it will sound briefly
every 5 minutes as a reminder to remove the load.
Air Fluff Cycle
This cycle provides up to 30 minutes of tumbling
without heat. Use AIR FLUFF to dry items
containing feathers or down, foam rubber, plastics,
or similarly textured, rubber-like materials, to
freshen clothing, pillows or blankets, or to dust
draperies.
Timed Dry Cycle
This cycle provides up to 90 minutes of drying time
at the temperature selection of your choice.
OFF

Energy Saving Tips

• Keep the lint screen clean and exhaust the dryer
correctly.
• Sort laundry properly and select proper
temperature and cycle settings. Choose the
Automatic Dry cycle whenever possible for
accurate drying time.
• Dry only full loads. Single items and small loads
usually take longer to dry.
• Avoid overloading, adding wet items to a partially
dry load, and overdrying.
• Dry one load after another to take advantage of a
warm dryer.
• Opening the door needlessly causes warm air to
escape, which prolongs drying time.
• If possible, use the dryer on low humidity days.
• Install the dryer in an area where the room temperature
is at least 45°F (7°C).
P/N 134099100 (0107)

Advertisement

loading