Energy Saving Tips - Frigidaire GLER1042FS - Electric Dryer Operating Instructions

Cycle Selection
(continued)
Auto
Regular Cycle
This cycle is best for cotton items. Drying time is
determined automatically at the temperature selection
of your choice.
• High heat is suggested for cotton items.
• Initially set cycle selector on NORMAL DRY.
• For items requiring more drying time, set cycle
selector on MORE.
• For items requiring less drying time, set cycle
selector on LESS.
Auto Delicate Cycle
This cycle is best for knit and delicate items. Drying time
is determined automatically at the temperature selection
of your choice.
• Low heat is suggested for knit and delicate items.
• Initially set cycle selector on NORMAL DRY.
• For items requiring more drying time, set cycle
selector on MORE.
• For items requiring less drying time, set cycle
selector on LESS.
• A signal will sound toward the end of the cool down
period when the Cycle Signal is ON.
• If the Press Saver option is turned to YES, the cycle
selector will advance to the Press Saver setting.
Unheated tumbling continues during Press Saver for
16 minutes to help reduce wrinkling if the dried load
cannot be removed promptly. A signal will sound
briefly every five minutes as a reminder to remove
the load when the Cycle Signal is turned on.
Timed Dry Regular Cycle
This cycle provides approximately 60 minutes of drying
time at the temperature selection of your choice.
Auto Perm Press Cycle
This cycle is best for permanent press items. Drying
time is determined automatically at the temperature
selection of your choice.
• Medium heat is suggested for permanent press
items.
• Initially set cycle selector on NORMAL DRY.
• For items requiring more drying time, set cycle
selector on MORE.
• For items requiring less drying time, set cycle selector
on LESS.
• A signal will sound toward the end of the cool down
period when the Cycle Signal is ON.
• If the Press Saver option is turned to YES, the cycle
selector will advance to the Press Saver setting.
Unheated tumbling continues during Press Saver
for 16 minutes to help reduce wrinkling if the dried
load cannot be removed promptly. A signal will
sound briefly every five minutes as a reminder to
remove the load when the Cycle Signal is turned on.

Energy Saving Tips

• Keep the lint screen clean and exhaust the dryer
correctly.
• Sort laundry properly and select proper temperature
and cycle settings. Choose an automatic dry cycle
whenever possible for accurate drying time.
• Dry only full loads. Single items and small loads
usually take longer to dry.
• Avoid overloading, adding wet items to a partially
dry load, and overdrying.
• Dry one load after another to take advantage of a
warm dryer.
• Opening the door needlessly causes warm air to
escape, which prolongs drying time.
• If possible, use the dryer on low humidity days.
• Install the dryer in an area where the room
temperature is at least 45°F (7°C).
P/N 134843000A (0611)