LENCO LS-40 User Manual page 7

5. AUX-IN (3.5mm Jack)
An external (auxiliary) audio source (i.e. personal CD/MP3 Player/Mobile phone or computer) can be connected to
this apparatus via the 3.5mm Aux-in Jack.
1. Plug a detachable Aux cable (not provided) into the 3.5mm Aux-in Jack at the rear of the unit.
2. Plug the other end of the Aux cable into the Headphone or Line-out socket of your External Source.
3. Power On the unit by turning the Volume Control Knob clockwise.
4. Rotate the Volume Control Knob to adjust the sound level.
Note: This unit complies with ERP2 regulation. Therefore the Lenco LS-40 will switch off to standby when there is
no audio signal (record or
The turntable has been secured for shipment with a transit screw. Use a coin or screwdriver to turn the transit screw
clockwise. This will allow the turntable to "float". During transportation, make sure to tighten this transit screw by
turning counter-clockwise.
Lenco
Turntable
Type
Drive Motor
Speed
Wow and flutter
Turntable platter
Cartridge
Type
Stylus
Optimum Tracking force
Output
Frequency response
Crosstalk
Signal-to-noise ratio(S/N)
General
Adapter
Aux in) during~20 minutes. To start using it again, please power off/on again.
LS-40
Belt drive full manual
DC motor
33 1/3 rpm, 45 rpm
≤0.35%
253mm
N-10/Ceramic Cartridge 402-M208-015
0.7 mil
4-6 grams
160-380mV (HP-4005)
-28db (10KHz)
10db (1KHz)
40db
input AC100-240V~50/60Hz 0.5A
7