Draytek Vigor2600Ge Introduction Manual page 18

Security Settings Click Security Settings to configure the security options.
Mode:
To improve the security and privacy of your wireless data packets one of the
following encryption feature can be used.
- Disable:Thurn off the encryption mechanism.
- WEP Only: Accepts only WEP clients and the encryption key should be entered
- WEP/802.1x Only: Accepts only WEP clients and the encryption key is got
- WEP or WPA/PSK: Accepts WEP and WPA clients simultaneously and the
- WEP/802.1x or WPA/802.1x: Accepts WEP and WPA clients simultaneously
- WPA/PSK Only: Accepts only WPA clients and the encryption key should be
- WPA/802.1x Only: Accepts only WPA clients and the encryption key is got
NOTE: You should also set RADIUS Server if WEP/802.1x or WPA/802.1x
WPA Encryption:
The WPA encrypts each frame transmitted from the radio using the pre-shared
key (PSK) entered from this panel or a key got dynamically through 802.1x.
Pre-Shared Key (PSK):Either 8~63 ASCII characters or 64 Hexadecimal digits
leading by 0x can be entered. For example "0123456789ABCD...." or
"0x321253abcde.....".
in WEP Key.
dynamically through 802.1x.
encryption key should be entered in WEP Key and PSK respectively.
and the encryption key is got dynamically through 802.1x.
entered in PSK.
dynamically through 802.1x.
, WEP/802.1x Only or WPA/802.1x Only mode is selected.
18