Using Your Electronic Control - Marvel MPBV415 Quick Reference Manual

Control Function Guide
Function
ON/OFF
Adjust Temperature
Toggle Between o F / o C
Leave Interior Light On
Hide Display
Adjust Light Color
Enable Sabbath Mode
Disable Sabbath Mode
Door Alert Notification
When the door is left open for more than 30 minutes:
• A tone will sound for several seconds every minute
• will appear in display
• Close door to silence alert and reset

USING YOUR ELECTRONIC CONTROL

Electronic control
Command
Press and release.
Press or and release.
Hold and for 5 seconds.
Press and release to leave interior light on for
12 hours; press again to deactivate.
Hold and press .
Press and hold then press
UI to flash. Once UI flashes, release
and use the to scroll through options 0-2
Press and hold for 5 seconds and release.
Press and release.
Figure 10
Notes
Unit will immediately turn ON or OFF.
When the display is flashing, press
point temperature. Note: temperature displayed is the actual
temperature inside unit.
The display will change units.
After 12 hours, factory default is restored; light will turn on when
door is open.
Display will turn off when door is closed. Unit will continue to
operate. Repeat command to turn on display.
Option
and wait for
and ,
Light will be set at full intensity when door is open, and 50%
intensity when door is closed.
The o F / o C symbol will flash briefly after 5 seconds. Interior
light and display will go dark and remain so until user resets
mode - unit continues to operate.
Display and interior light return to normal operation.
First Use
Initial startup requires no adjustments. When plugged in, the unit will
begin operating under the factory default settings. If the unit was turned off
during installation, simply press
To turn the unit off, press
NOTE
Temperature displayed reflects actual temperature inside unit. If the
temperature displayed is different than selected, the unit is progressing
towards the selected temperature. Time to reach set point varies based
upon ambient temperature, temperature of product loaded, door openings,
etc. Marvel recommends allowing the unit to reach set points before
loading.
8
or to adjust the set
Open Door Closed Door
White White
Blue Blue
White Blue
and the unit will immediately switch on.
.