Installing The Anti-Tip Device - Marvel MPBV415 Quick Reference Manual

WARNING
!
•
•
•
Anti-Tip Device
WARNING
!
If your appliance is not located under a counter top
(free standing), you must use an anti-tip device in-
stalled as per these instructions. If the unit is removed
from its location for any reason, make sure that the
device is properly engaged with the anti-tip bracket
when you push the appliance back into the original
location. If the device is not properly engaged, there is
a risk of the appliance tipping over, with the potential
for property damage or personal injury.
NOTE
If installing on a concrete floor, concrete fasteners are
required, (not included with the anti-tip kit).
CAUTION
!
Any finished flooring should be protected with appropriate
material to avoid damage when moving the unit.
Floor Mount Installation
The anti-tip bracket is to be located on the floor in the left or
right rear corner of the appliance as shown in "Figure 9".
*** FOR FULL INSTALLATION INSTRUCTIONS, REFER TO THE PRODUCT OWNER'S GUIDE
INSTALLING THE ANTI TIP DEVICE
ALL APPLIANCES CAN TIP
RESULTING IN INJURY.
INSTALL THE ANTI-TIP
BRACKET PACKED WITH
THE APPLIANCE.
FOLLOW THE INSTRUC-
TIONS BELOW
ONLINE AT WWW.MARVELREFRIGERATION.COM
Anti-Tip
Bracket
Leveling Leg
Bottom View of
21 ⁄ "
1
2
(54.6 cm)
7
Appliance
Front of cabinet
Figure 9