Cleaning And Storage - Polaris Victory Special Edition 2000 Owner's Manual

CLEANING AND STORAGE

Cleaning
Complete and thorough cleaning of your Victory motorcycle will accomplish many
things such as:
D Extend the useful life of many components
D As a part of the cleaning process you will also be performing a complete and
thorough visual inspection that may reveal items in need of repair that you might
otherwise not find.
D Enhance the value of your motorcycle
D Extend the useful life of many cosmetic items.
Before cleaning your motorcycle do the following:
1. Block off the end of the exhaust pipes to prevent water from entering the
exhaust system.
2. Make sure the spark plugs and all filler caps are securely installed.
3. Avoid spraying the air filter assembly.
NOTE: Degreaser may be applied to excessively greasy areas. If you choose to
use such a product, do not apply the degreaser to any cosmetically painted or
plated areas. Also, do not apply the degreaser to any areas that depend upon
grease for proper functioning such as brake and shifting pivot points. If degreaser
is necessary in these areas, make sure to re--grease the affected areas after your
cleaning is finished.
Rinse the dirt and degreaser off with a low pressure garden hose.
CAUTION
Excessive hose pressure may cause water seepage into bearings and pivoting or
sliding areas. Wheel bearings, transmission seals and electrical parts can become
damaged if excessive pressure is used.
The use of extremely high pressure washing wands (such as coin operated car
washes) are the cause of many expensive repair bills.
Once the bulk of the dirt has been rinsed off, wash all surfaces with warm water and
a mild detergent.
Rinse the motorcycle off immediately with clean, low pressure water and dry the
surfaces with a chamois cloth or clean soft absorbant cloth.
Repetitive polishing and cleaning will accelerate the wear of your tank badge.
54