Table of Contents
Advertisement
3.2.1
For information about the cables to be used when connecting the operator panel to
the controller, please refer to the help file for the driver in question.
3.2.2
Cables, peripheral equipment and accessories must be suitable for the application
and its environment. For further details or recommendations, please refer to the
supplier.
3.2.3
In the firmware there are some ports that are open by default due to the operating
system or that the internal application requires it.
Type
UDP
UDP
UDP
(1)
Filtered.
Beijer Electronics, MAEN332
Connections to the Controller
Other Connections and Peripherals
Open Ports
Description
Project transfer (9999)
Netbios (137)
Netbios (138)
Installation
Open by default
Yes
Yes
(1)
No
10
Advertisement
Table of Contents
Need help?
Do you have a question about the X2 base 10 v2 HP and is the answer not in the manual?