Bluetooth Pairing - Levven Soul Bar Operating Instructions Manual

j)
k) Enjoy using your remote to control the TV Transmitter's volume.
NOTE: If you make a mistake in learning the buttons on your remote, restart the process
and perform the steps again.
4.4 SETUP WITH AUDIO NOT FROM A TV
Power
LED
You may prefer to setup Soul Bar when your audio comes not from your TV, but from your disc
player, your cable box, your set top box (Amazon Fire TV
lite box.
You can follow the same procedure as described in the previous section, but instead connect
SKAA Bond
your TV transmitter to your preferred audio source.
LED
4.5

BLUETOOTH PAIRING

Follow these instructions to setup this feature:
1. Set Soul Bar in Bluetooth receive or Bluetooth relay mode by clicking the gear button.
2. Start playing audio on the Bluetooth sending device.
3. Click the Bluetooth button.
Gear
Power SKAA Bond
Button
4. Pair your Bluetooth device to Soul Bar.
LED LED
For more information on pairing Bluetooth devices, refer to your device's manual or support
website.
SKAA Bond
4.6 PHONE OR TABLET DEVICE SETUP
Button
Soul Bar can also play audio from any SKAA transmitter.
1. Insert a SKAA transmitter into your device.
2. Play some audio on your device.
3. Double-click the SKAA Bond button on Soul Bar. The SKAA Bond LED will be lit bright amber
and you will hear your audio playing on Soul Bar.
4. Press and hold the SKAA Bond button for 3 seconds to add your SKAA transmitter to Soul
Bar's green list. The SKAA Bond LED will be lit bright green.
5. Press the bond button four times to put Soul Bar into swing mode. The LED will be lit bright
red.
Gear SKAA Bond
4.7 USING THE SKAA BOND BUTTON
Button Button
Single-Click
Double-Click
jack.
Power cycle the TV Transmitter by removing the USB plug and plugging it back in.
SKAA Bond
LED
Bluetooth
LED
SKAA Bond Bluetooth
Bluetooth
Button Button
LED
Bluetooth Volume -
Button Button
Bluetooth
Button
Playing or waiting to play from a SKAA
transmitter on the green list.
Playing or waiting to play from a SKAA
transmitter that has not yet been added to
the green list.
Bluetooth Relay
LED
Relay
LED
Volume -
Relay
Button
LED
Volume +
Button
Volume -
Button
LED
, Roku or Apple TV
TM TM
Volume +
Button
Volume +
Button
Amber (dim) = waiting
Amber (bright) = playing
Green (dim) = waiting
Green (bright) = playing
), or your satel-
TM
9